Dave Heavy Industries http://www.daveheavyindustries.com Dave Heavy Industries - blog Mon, 12 Aug 2013 00:24:10 +0000 en-US hourly 1 http://wordpress.org/?v=3.6 NGINX snmp monitoring http://www.daveheavyindustries.com/2013/08/12/nginx-snmp-monitoring/ http://www.daveheavyindustries.com/2013/08/12/nginx-snmp-monitoring/#comments Sun, 11 Aug 2013 22:09:40 +0000 admin http://wp.daveheavyindustries.com/?p=397 So far as I could tell, nginx doesn't provide any stats out to snmp. This is something we like to watch closely so I put together the following based on a script I found here - http://www.kutukupret.com/2011/05/31/how-to-graph-nginx-statistics/

The script above took a few metrics out of the nginx_status stub page that you can include into your nginx config.

you can do this by including

location /nginx_status {
stub_status on;
access_log off;
}

under your server binding. you might (should) want to restrict access to this to only your internal subnets or localhost.

nginx_stats.pl

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

#!/usr/bin/perl
# $Revision: 2 $
# $Date: 2008-09-12 15:11:40 +0300 (Fri, 12 Sep 2008) $
 
my %opt = (
# http link to nginx stub_status, be sure turn on stub_status in nginx conf
    nginx_status   => 'http://localhost:80/nginx_status',
# path for program what may dump web page, normaly lynx -dump
#    lynx            => 'curl ',
    lynx            => 'wget -q -Y off -O -',
);
 
$opt{var} = $ARGV[0] if $ARGV[0];
$opt{nginx_status} = $ARGV[1] if $ARGV[1] and $ARGV[1]=~/^http:\/\/\w+/;
$opt{var} ||= '';
 
my $do = `$opt{lynx} $opt{nginx_status}`;
 
    $do=~/^Active connections:\s*(\d+)\s*$/ms or warn "Error! Can't find data!\nIN :\n$do";
    $opt{d1} = $1;
    $do=~/^\s*(\d+)\s+(\d+)\s+(\d+)\s*$/ms or warn "Error! Can't find data!\nIN :\n$do";
    $opt{d2} = $1;
    $opt{d3} = $2; 
    $opt{d4} = $3;
#elsif { $do=~/^Reading:\s+(\d+).*Writing:\s+(\d+).*Waiting:\s+(\d+)/; }
 
print "$opt{d1}\n";
print "$opt{d2}\n";
print "$opt{d3}\n";
print "$opt{d4}\n";
#print "$opt{up}\n" if $opt{up};
print "Nginx $opt{var}\n";

Once this has been created somewhere (I like /bin for this), you then need to link it into snmp.

you can do this with something along the lines of  the following in your /etc/snmp/snmpd.conf

extend .1.3.6.1.4.1.3031.67 "exim-stats"        /usr/bin/perl   /bin/nginx_stats.pl

output will look something like

iso.3.6.1.4.1.3031.67.1.0 = INTEGER: 1
iso.3.6.1.4.1.3031.67.2.1.2.10.101.120.105.109.45.115.116.97.116.115 = STRING: "/usr/bin/perl"
iso.3.6.1.4.1.3031.67.2.1.3.10.101.120.105.109.45.115.116.97.116.115 = STRING: "/bin/nginx_stats.pl"
iso.3.6.1.4.1.3031.67.2.1.4.10.101.120.105.109.45.115.116.97.116.115 = ""
iso.3.6.1.4.1.3031.67.2.1.5.10.101.120.105.109.45.115.116.97.116.115 = INTEGER:5
iso.3.6.1.4.1.3031.67.2.1.6.10.101.120.105.109.45.115.116.97.116.115 = INTEGER:1
iso.3.6.1.4.1.3031.67.2.1.7.10.101.120.105.109.45.115.116.97.116.115 = INTEGER:1
iso.3.6.1.4.1.3031.67.2.1.20.10.101.120.105.109.45.115.116.97.116.115 = INTEGER: 4
iso.3.6.1.4.1.3031.67.2.1.21.10.101.120.105.109.45.115.116.97.116.115 = INTEGER: 1
iso.3.6.1.4.1.3031.67.3.1.1.10.101.120.105.109.45.115.116.97.116.115 = STRING: "1"
iso.3.6.1.4.1.3031.67.3.1.2.10.101.120.105.109.45.115.116.97.116.115 = STRING: "1
360890
360890
338689
Nginx "
iso.3.6.1.4.1.3031.67.3.1.3.10.101.120.105.109.45.115.116.97.116.115 = INTEGER:5
iso.3.6.1.4.1.3031.67.3.1.4.10.101.120.105.109.45.115.116.97.116.115 = INTEGER:0
iso.3.6.1.4.1.3031.67.4.1.2.10.101.120.105.109.45.115.116.97.116.115.1 = STRING: "1"
iso.3.6.1.4.1.3031.67.4.1.2.10.101.120.105.109.45.115.116.97.116.115.2 = STRING: "360890"
iso.3.6.1.4.1.3031.67.4.1.2.10.101.120.105.109.45.115.116.97.116.115.3 = STRING: "360890"
iso.3.6.1.4.1.3031.67.4.1.2.10.101.120.105.109.45.115.116.97.116.115.4 = STRING: "338689"
iso.3.6.1.4.1.3031.67.4.1.2.10.101.120.105.109.45.115.116.97.116.115.5 = STRING: "Nginx "
]]> http://www.daveheavyindustries.com/2013/08/12/nginx-snmp-monitoring/feed/ 0 SCCP and Asterisk http://www.daveheavyindustries.com/2012/11/05/sccp-and-asterisk/ http://www.daveheavyindustries.com/2012/11/05/sccp-and-asterisk/#comments Mon, 05 Nov 2012 06:31:42 +0000 admin http://wp.daveheavyindustries.com/?p=355 So, we bought a bunch of new cisco phones to replace some failing SNOM devices around the place. Realizing a chance to implement some great functionality, I decided to use chan-sccp-b to run them on the SCCP protocol instead of sip. I've put together some steps to help you through the process, and the module I wrote for freepbx (and how to expose that through to the elastix gui)

First things first, you'll need to get a copy of chan-sccp-b (http://chan-sccp-b.sourceforge.net/) and compile it. If you don't know how to do that, follow the steps on the chan-sccp-b site.

Grab a copy of my freepbx module -

http://wp.daveheavyindustries.com/?attachment_id=357  

http://wp.daveheavyindustries.com/?attachment_id=372

http://wp.daveheavyindustries.com/?attachment_id=378

http://wp.daveheavyindustries.com/?attachment_id=382

I used this sccp.conf, pay attention to the bold lines, this is what tells chan-sccp-b to talk to the mysql database for it's config (which the freepbx module updates).

[general]
servername = Asterisk
 keepalive = 60
 debug = core,event,device,channel
 context = from-internal
 dateFormat = D.M.Y
 bindaddr = 0.0.0.0
 port = 2000
 disallow=all
 allow=g722
 allow=g729
 allow=alaw
 allow=ulaw
 firstdigittimeout = 16
 digittimeout = 8
 autoanswer_ring_time = 1
 autoanswer_tone = 0x32
 remotehangup_tone = 0x32
 transfer_tone = 0
 callwaiting_tone = 0x2d
 musicclass=default
 language=en
 deny=0.0.0.0/0.0.0.0
 permit=10.0.0.0/255.0.0.0
 dnd = off
 sccp_tos = 0x68
 sccp_cos = 4
 audio_tos = 0xB8
 audio_cos = 6
 video_tos = 0x88
 video_cos = 5
 echocancel = on
 silencesuppression = off
 private = off
 callanswerorder=oldestfirst
 meetme = on
 meetme = qxd
 hotline_enabled=yes ; can devices without configuration register
 hotline_context=default ; context for hotline
 hotline_extension=111 ; extension will be dialed on offHook
 devicetable=sccpdevice
 linetable=sccpline

append this to your res_config_mysql.conf (your username, password  and database name added obviously)

[asterisk]
 dbhost = 127.0.0.1
 dbname = asterisk
 dbuser = username
 dbpass = password

execute mysql-v5.sql from chan-sccp_trunk/conf of your downloaded chan-sccp-b source on your mysql database

mysql --user=user --password=password asterisk < mysql-v5.sql

install the module to freepbx (http://yourpbxip/admin )

Admin -> Module Admin ->Upload Module ->Chose File -> browse to sccp_module.tar.gz (downloaded from above) -> Upload
Admin -> Module Admin -> SCCP Manager -> Install -> Process (bottom right hand corner)  -> Confirm

Two new menus will be added under "Basic"

SCCP Device Manager
SCCP Line Manager
SCCP Button Manager <-- SCCP Button manager cannot be accessed directly, this is called via the SCCP Device Manager

Self explanatory really.

now the last step is to add sccp to the extension list so you can map extensions to SCCP.

edit /var/www/html/admin/modules/core/functions.inc.php around line 6041.

Add this above "$currentcomponent->setoptlistopts('devicelist', 'sort', false);" :-

$currentcomponent->addoptlistitem('devicelist', 'sccp', _("SCCP MAP"));

Now, for elastix, to get the module visible from the elastix gui, I ahd to add two lines to modules/pbxadmin/themes/default/main.tpl, just below extensions

<li><a href="/?menu=pbxconfig&amp;type=setup&amp;display=sccpline" >SCCP Line</a></li>
<li><a href="/?menu=pbxconfig&amp;type=setup&amp;display=sccpdevice" >SCCP Device</a></li>

Install JSON module for PHP

yum info php-pecl-json-1.2.1-4.el5.x86_64

and add to php.ini under Dynamic Extensions

extension=json.so

 

and you're done!

]]> http://www.daveheavyindustries.com/2012/11/05/sccp-and-asterisk/feed/ 29 Powershell WSUS approval between targets http://www.daveheavyindustries.com/2012/10/31/powershell-wsus-approval-between-targets/ http://www.daveheavyindustries.com/2012/10/31/powershell-wsus-approval-between-targets/#comments Wed, 31 Oct 2012 01:43:43 +0000 admin http://wp.daveheavyindustries.com/?p=347 Well, if you're anything like us, you'll have all sorts of tiered update computer targets, and you'll be staging your updates between them.

Usually it'll be something along the lines of  DEV  -> UAT -> PRE_PRODUCTION -> PRODUCTION

So, how do you get updates that have been developed against in DEV to UAT, or from UAT to PREPROD, or PREPROD into production?

well, I wrote a script.. two really, but we'll get to that.

update approval copier.

This copies all update approvals from a source target into a destination target where it has been approved, installed, and where it hasn't failed (on any computer) on the source computer target.

[void][reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration")
$wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::getUpdateServer("WSUS SERVER NAME HERE",$False)
$updateScope = new-object Microsoft.UpdateServices.Administration.UpdateScope;
$updateScope.IncludedInstallationStates = "Installed"
$updates = $wsus.GetUpdates($updateScope)
$groups = $wsus.GetComputerTargetGroups()
foreach ($group in $groups) {
  if ($group.name -eq "SOURCE COMPUTER TARGET NAME" )
  {
     $sourcegroup = $group
  }
  if ($group.name -eq "DESTINATION COMPUTER TARGET NAME")
  {
     $targetgroup = $group
  }
}
foreach( $update in $updates){
                if ($update.GetUpdateApprovals($sourcegroup).Count -ne 0)
                {
            if ($update.GetSummaryForComputerTargetGroup($sourcegroup).InstalledCount -ne 0 )  {
                 if ($update.GetSummaryForComputerTargetGroup($sourcegroup).FailedCount -eq 0 ) {
                   if ($update.GetUpdateApprovals($targetgroup).Count -eq 0)
                   {
                       Write-Host ("Approving {0} for {1}" -f $update.Title,$targetgroup.Name) -Fore Green -Back Black
                                $update.Approve('Install',$targetgroup)
                   }
                }
      }
   }
}

Approve already installed updates

Now... the second is very simpler, it's for when you first deploy WSUS, and you want to copy a baseline for approvals from already updated servers within that target. Note the source and the target are the same (although you could change if it you wanted to copy installed updates as approvals to another target)

[void][reflection.assembly]::LoadWithPartialName("Microsoft.UpdateServices.Administration")
$wsus = [Microsoft.UpdateServices.Administration.AdminProxy]::getUpdateServer("WSUS SERVER NAME HERE",$False)
$updateScope = new-object Microsoft.UpdateServices.Administration.UpdateScope;
$updateScope.IncludedInstallationStates = "Installed"
$updates = $wsus.GetUpdates($updateScope)
$groups = $wsus.GetComputerTargetGroups()
foreach ($group in $groups) {
  if ($group.name -eq "SOURCE COMPUTER TARGET NAME" )
  {
     $sourcegroup = $group
  }
  if ($group.name -eq "SOURCE COMPUTER TARGET NAME")
  {
     $targetgroup = $group
  }
}
foreach( $update in $updates){
            if ($update.GetSummaryForComputerTargetGroup($sourcegroup).InstalledCount -ne 0 )  {
                 if ($update.GetSummaryForComputerTargetGroup($sourcegroup).FailedCount -eq 0 ) {
                   if ($update.GetUpdateApprovals($targetgroup).Count -eq 0)
                   {
                       Write-Host ("Approving {0} for {1}" -f $update.Title,$targetgroup.Name) -Fore Green -Back Black
                                $update.Approve('Install',$targetgroup)
                   }
             }
      }
}
]]> http://www.daveheavyindustries.com/2012/10/31/powershell-wsus-approval-between-targets/feed/ 0 ASP Classic – Escape string for JS http://www.daveheavyindustries.com/2011/10/25/asp-classic-escape-string-for-js/ http://www.daveheavyindustries.com/2011/10/25/asp-classic-escape-string-for-js/#comments Tue, 25 Oct 2011 05:58:08 +0000 admin http://wp.daveheavyindustries.com/?p=247 for those that know me... ASP Classic is a pain I have to deal with every day... the simplest things that you've come to accept from every other language is just painful in ASP Classic. Every time I have to do something that I shouldn't have to do, I try to help as many people as possible not have to work it out for themselves. Here is a function to escape a string for use in JS. Enjoy.

Function js_escape(ByRef input_string)

    If NOT IsNull(input_string) AND input_string <> "" Then
        Dim working_string
        working_string = input_string
        working_string = Replace(working_string, vbNewLine, "\n")
        working_string = Replace(working_string, vbTab, "\t")
        working_string = Replace(working_string, "'", "\'")
        ' .. other escape values/strings you may wish to add
        js_escape = working_string
    End If
End Function
]]> http://www.daveheavyindustries.com/2011/10/25/asp-classic-escape-string-for-js/feed/ 0 MRTG Config for Eaton ConnectUPS Web/SNMP Card http://www.daveheavyindustries.com/2011/10/24/mrtg-config-for-eaton-connectups-websnmp-card/ http://www.daveheavyindustries.com/2011/10/24/mrtg-config-for-eaton-connectups-websnmp-card/#comments Mon, 24 Oct 2011 01:31:12 +0000 admin http://wp.daveheavyindustries.com/?p=239 We've had this one for a while, decided to put some power monitoring on it to graph the usage...

The UPS has a metric for each Phase, so for a total output, we have to aggregate the figure. I chose to use Watts in my graphs. The other thing to note is that it requires version 1 of SNMP.

Config below....

$Path is the working directory, needs to exist. $Name is the mrtg name of the instance. $Community is the snmp community (usually public), $host is the hostname/ip of the device. $Title is the friendly name of the instance. Easy as that.

 

WorkDir:$Path
Target[$Name]: enterprises.534.1.4.4.1.4.1&enterprises.534.1.4.4.1.4.1:$Community@$Host:::::1 + enterprises.534.1.4.4.1.4.2&enterprises.534.1.4.4.1.4.2:$Community@$Host:::::1 + enterprises.534.1.4.4.1.4.3&enterprises.534.1.4.4.1.4.3:$Community@$Host:::::1
MaxBytes[$Name]: 36000
Title[$Name]: $Title
PageTop[$Name]: <H1>$Title</H1>
Options[$Name]: gauge, nopercent, absolute, unknaszero, growright
YLegend[$Name]: Watts
ShortLegend[$Name]: Watts
Legend1[$Name]: Watts
Legend2[$Name]: .
Legend3[$Name]: Max value per interval on graph
Legend4[$Name]: .
LegendI[$Name]: True Power
LegendO[$Name]: .
Colours[$Name]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$Name]: ymw

 

 

 

]]> http://www.daveheavyindustries.com/2011/10/24/mrtg-config-for-eaton-connectups-websnmp-card/feed/ 0 MRTG config for APC Switched Rack PDU http://www.daveheavyindustries.com/2011/10/24/mrtg-config-for-apc-switched-rack-pdu/ http://www.daveheavyindustries.com/2011/10/24/mrtg-config-for-apc-switched-rack-pdu/#comments Mon, 24 Oct 2011 00:37:31 +0000 admin http://wp.daveheavyindustries.com/?p=233 We just got a pair of AP8959EU3 Managed power rails, and decided to point MRTG at it to graph our power usage...

Well, the SNMP oid for this device is enterprises.318.1.1.12.2.3.1.1.2.1 .The current is returned as AMPSx10 .

I.E... will return 100 for 10 amps. The reason for this is that all things snmp expect whole numbers (bits, bytes etc..), the rail measures to 1/10th AMP, so this is the only way they could really do it.

Because of this, you need to let MRTG know that the scale is 0.1

other than that... its very straight foward.

$Path is the Working directory, you need to create it before running it. $Community is the snmp community (usually public), $Host is the hostname/ip of the power rail, $name is the MRTG name of the instance. $Title is the friendly name. Easy?

WorkDir: $PATH
Target[$NAME]: enterprises.318.1.1.12.2.3.1.1.2.1&enterprises.318.1.1.12.2.3.1.1.2.1:$COMMUNITY@$HOST
MaxBytes[$NAME]: 200
Title[$NAME]: $Title
PageTop[$NAME]: <H1>$Title</H1>
Options[$NAME]: gauge, nopercent, absolute, unknaszero, growright
YLegend[$NAME]: Current
ShortLegend[$NAME]: Amps
Legend1[$NAME]: Current, Amps
Legend2[$NAME]: .
Legend3[$NAME]: Max value per interval on graph
Legend4[$NAME]: .
LegendI[$NAME]: Current
LegendO[$NAME]: .
Colours[$NAME]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff
WithPeak[$NAME]: ymw
YTicsFactor[$NAME]: 0.1
]]> http://www.daveheavyindustries.com/2011/10/24/mrtg-config-for-apc-switched-rack-pdu/feed/ 0 #junipered. http://www.daveheavyindustries.com/2011/09/15/junipered/ http://www.daveheavyindustries.com/2011/09/15/junipered/#comments Thu, 15 Sep 2011 03:35:42 +0000 admin http://wp.daveheavyindustries.com/?p=213 #junipered - to be promised a service or a product that was not delivered
#ciscoed - When you deliver the products and solutions that the customer wants, when the customer wants it.
... apparently.


Currently trending on twitter, #junipered means a few different things to a few different people. For anyone with marketing experience, it represents the blatent disregard for the cardinal rule of advertising. For Cisco fans, it's a reference to http://www.overpromisesunderdelivers.net , saying Juniper over promises and is a vendor of vaporware that is only hurting its customers. For Juniper fans, its a sign that Cisco is launching a childish advertising campaign as they're loosing market share to Juniper.

For me, it's sad. As a cisco fan, I'm a little worried that they're stooping this low, and certainly taken away from their image they I had of them. This is the first time I've seen them actually acknowledging the competition in any other way besides performance comparisons (and always retaliated against with TCO comparisons).

I'm sure everyone can see many sides to this, but what will be most interesting, is Junipers response, if any.

 

]]> http://www.daveheavyindustries.com/2011/09/15/junipered/feed/ 2 HTC Desire S Flashing problems… M4G2DE http://www.daveheavyindustries.com/2011/09/13/htc-desire-s-flashing-problems-m4g2de/ http://www.daveheavyindustries.com/2011/09/13/htc-desire-s-flashing-problems-m4g2de/#comments Mon, 12 Sep 2011 23:01:19 +0000 admin http://wp.daveheavyindustries.com/?p=207 After a huge amount of effort, lots of "status 1" lots of "can't open /cache/recovery/log " ... I stumbled across this site - http://forum.xda-developers.com/showthread.php?t=1150917

My heart sank. I feared for the worst. I had infact ejected and re-inserted the battery in close succession when it had frozen earlier that day.

I installed the HTC adb and fastboot drivers, android SDK and platform tools, booted the clockworkmod bootloader (yes, was already s-off and gingerbroken), and started throwing some adb commands at it from here - http://forum.xda-developers.com/showpost.php?p=16135893&postcount=27

adb shell cat /sys/devices/platform/msm_sdcc.2/mmc_host/mmc0/mmc0:0001/name
M4G2DE

... bugger, he thought.

adb shell  dmesg | grep mmc0

lots of i/o errors, but most importantly...  mmc0: Deferred resume failed

... bugger, bugger, he thought. the phone gods were angry with me.

Just as the xda-developer prophecy fortold, your mmc will stop working if its a M4G2DE and you don't treat the battery nicely.

My next thought was, restore the original boot and recovery and try and plead my case for a warranty... I doubted they'll be kind to me if they saw clockworkmod on boot.

so, I pulled apart the HTC telstra RUU and got the boot.img and recovery.img ready for a fastboot (more drivers required.. agh.) and was presented with

C:\android\tools>fastboot.exe flash boot ..\boot_signed.img
      sending 'boot' (2836 KB)... OKAY [  0.495s]
                writing 'boot'... FAILED (remote: not allowed)

... That's a bit rude, same thing for recovery.img.

As a last stich attempt, I booted back into fastboot, and ran the telstra RUU again. as i couldn't use adb to see the kmsg, I assumed it was going poorly... until... it booted!

failing to believe what I was seeing.... I ran the same command given to me to check the mmc... and..

<3>[    8.589385] mmc0: No card detect facilities available
<6>[    8.590026] mmc0: Qualcomm MSM SDCC at 0x00000000a0500000 irq 98,0 dma 7
<6>[    8.590148] mmc0: Platform slot type: MMC
<6>[    8.590393] mmc0: 4 bit data mode disabled
<6>[    8.590515] mmc0: 8 bit data mode enabled
<6>[    8.590637] mmc0: MMC clock 144000 -> 50000000 Hz, PCLK 96000000 Hz
<6>[    8.590881] mmc0: Slot eject status = 0
<6>[    8.591003] mmc0: Power save feature enable = 1
<6>[    8.591247] mmc0: DM non-cached buffer at ffa0f000, dma_addr 0x0bb01000
<6>[    8.591369] mmc0: DM cmd busaddr 0x0bb01000, cmdptr busaddr 0x0bb01300
<6>[    8.745025] mmc0: new high speed MMC card at address 0001
<6>[    8.746337] mmcblk0: mmc0:0001 M4G2DE 2.10 GiB

SUCCESS! Potentially good news for anyone mid-heart-attack, your phone might not (but still could be) screwed.

I have since re gingerbroken, installed Cyanogen, and am back up and running with a working phone.

------

Update 20/9 - phone has been operational for about a week now, all is good.

To follow up a few questions - logs did indicate "failed to get card ready" , "deferred resume failed", several DMA errors, several (thousands of lines) of i/o errors. I guess something I've taken from all of this is that its possible that the current tests accepted on XDA to determine a hardware fault are not conclusive. I was ready to prepare my phone for a warranty (if I was lucky) repair, and installing the stock RUU fixed the issue. I have no doubt that there are people with a physically damaged emmc out there, but I was not one of them, and I think that means I'm not alone - so don't give up yet, try and flash the RUU from fastboot.

I was asked on XDA to prepare a filesystem and format it, and confirm there were no errors - there were not.

~ # mke2fs -j /dev/block/mmcblk0p27
mke2fs -j /dev/block/mmcblk0p27
mke2fs 1.40.8 (13-Mar-2008)
/dev/block/mmcblk0p27 is apparently in use by the system; will not make a filesy
stem here!
~ # umount /cache
umount /cache
~ # mke2fs -j /dev/block/mmcblk0p27
mke2fs -j /dev/block/mmcblk0p27
mke2fs 1.40.8 (13-Mar-2008)
Filesystem label=
OS type: Linux
Block size=1024 (log=0)
Fragment size=1024 (log=0)
76912 inodes, 307196 blocks
15359 blocks (5.00%) reserved for the super user
First data block=1
Maximum filesystem blocks=67633152
38 block groups
8192 blocks per group, 8192 fragments per group
2024 inodes per group
Superblock backups stored on blocks:
8193, 24577, 40961, 57345, 73729, 204801, 221185

Writing inode tables: done
Creating journal (8192 blocks): done
Writing superblocks and filesystem accounting information: done

This filesystem will be automatically checked every 35 mounts or
180 days, whichever comes first. Use tune2fs -c or -i to override.

~ # e2fsck /dev/block/mmcblk0p27
e2fsck /dev/block/mmcblk0p27
e2fsck 1.41.6 (30-May-2009)
/dev/block/mmcblk0p27: clean, 11/76912 files, 20003/307196 blocks
~ # e2fsck /dev/block/mmcblk0p27 -f
e2fsck /dev/block/mmcblk0p27 -f
e2fsck 1.41.6 (30-May-2009)
Pass 1: Checking inodes, blocks, and sizes
Pass 2: Checking directory structure
Pass 3: Checking directory connectivity
Pass 4: Checking reference counts
Pass 5: Checking group summary information
/dev/block/mmcblk0p27: 11/76912 files (0.0% non-contiguous), 20003/307196 blocks

]]> http://www.daveheavyindustries.com/2011/09/13/htc-desire-s-flashing-problems-m4g2de/feed/ 11 iinet cisco 877 config http://www.daveheavyindustries.com/2011/09/03/iinet-cisco-877-config/ http://www.daveheavyindustries.com/2011/09/03/iinet-cisco-877-config/#comments Sat, 03 Sep 2011 06:59:25 +0000 admin http://wp.daveheavyindustries.com/?p=193 This is the config I'm recommending for people running cisco 877's on iinet. feel free to post back with any amendments.
config working on IOS 12.4(24)T3

replace [username] with your iinet username and [password] with your iinet password.

hostname router
ip dhcp pool general
network 10.10.10.0 255.255.255.0
dns-server 10.10.10.1
default-router 10.10.10.1
domain-name router.local
!
ip dns server
ip domain name router.local
ip name-server 203.0.178.191
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip mroute-cache
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
switchport access vlan 1
!
interface FastEthernet1
switchport access vlan 1
!
interface FastEthernet2
switchport access vlan 1
!
interface FastEthernet3
switchport access vlan 1
!
interface Vlan1
description --- INSIDE INTERFACE ---
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
!
interface Dialer1
description --- OUTSIDE INTERFACE ---
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [USERNAME]@iinet.net.au
ppp chap password password 0 [PASSWORD]
ppp pap sent-username [USERNAME]@iinet.net.au  password [PASSWORD]
!
ip access-list extended nat
permit ip 10.10.10.0 0.0.0.255 any
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
ip dns server
ip nat inside source list nat interface Dialer1 overload

[facebook_ilike]
]]> http://www.daveheavyindustries.com/2011/09/03/iinet-cisco-877-config/feed/ 0 TPG Username http://www.daveheavyindustries.com/2011/08/30/tpg-username/ http://www.daveheavyindustries.com/2011/08/30/tpg-username/#comments Mon, 29 Aug 2011 22:37:14 +0000 admin http://wp.daveheavyindustries.com/?p=190 last one - TPG Usernames for use on dialing up from your router..
should be in the format username@tpg.com.au

]]> http://www.daveheavyindustries.com/2011/08/30/tpg-username/feed/ 0