Dave Heavy Industries » 877 http://www.daveheavyindustries.com Dave Heavy Industries - blog Mon, 12 Aug 2013 00:24:10 +0000 en-US hourly 1 http://wordpress.org/?v=3.6 iinet cisco 877 config http://www.daveheavyindustries.com/2011/09/03/iinet-cisco-877-config/ http://www.daveheavyindustries.com/2011/09/03/iinet-cisco-877-config/#comments Sat, 03 Sep 2011 06:59:25 +0000 admin http://wp.daveheavyindustries.com/?p=193 This is the config I'm recommending for people running cisco 877's on iinet. feel free to post back with any amendments.
config working on IOS 12.4(24)T3

replace [username] with your iinet username and [password] with your iinet password.

hostname router
ip dhcp pool general
network 10.10.10.0 255.255.255.0
dns-server 10.10.10.1
default-router 10.10.10.1
domain-name router.local
!
ip dns server
ip domain name router.local
ip name-server 203.0.178.191
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip mroute-cache
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
!
!
interface FastEthernet0
switchport access vlan 1
!
interface FastEthernet1
switchport access vlan 1
!
interface FastEthernet2
switchport access vlan 1
!
interface FastEthernet3
switchport access vlan 1
!
interface Vlan1
description --- INSIDE INTERFACE ---
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
!
interface Dialer1
description --- OUTSIDE INTERFACE ---
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [USERNAME]@iinet.net.au
ppp chap password password 0 [PASSWORD]
ppp pap sent-username [USERNAME]@iinet.net.au  password [PASSWORD]
!
ip access-list extended nat
permit ip 10.10.10.0 0.0.0.255 any
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
ip dns server
ip nat inside source list nat interface Dialer1 overload

[facebook_ilike]
]]> http://www.daveheavyindustries.com/2011/09/03/iinet-cisco-877-config/feed/ 0 XBOX Live port forwards for Cisco 800 (877 used here) http://www.daveheavyindustries.com/2011/02/10/xbox-live-port-forwards-for-cisco-800/ http://www.daveheavyindustries.com/2011/02/10/xbox-live-port-forwards-for-cisco-800/#comments Thu, 10 Feb 2011 03:59:59 +0000 admin http://wp.daveheavyindustries.com/?p=105 How to get xbox live working on your xbox behind a Cisco

Xbox Live needs TCP/3074, UDP/3074, UPD/88 forwarded to the xbox from the outside interface of the router

Xbox Connect needs TCP/8602 forwarded

Assumptions

Xbox - 10.1.1.2
Router - 10.1.1.1
Internet Interface - Dialer1

Instructions

Log into your router (usually something like telnet 10.1.1.1 from your pc, and enter the login credentials)

Enter configure mode

Configure Terminal

Add the Forwards

ip nat inside source static tcp 10.1.1.2 3074 interface Dialer1 3074
ip nat inside source static udp 10.1.1.2 3074 interface Dialer1 3074
ip nat inside source static udp 10.1.1.2 88 interface Dialer1 88
ip nat inside source static tcp 10.1.1.2 8602 interface Dialer1 8602




Exit Configure mode
Exit

Write the config & Exit

Write Memory
Exit
Easy huh?
]]> http://www.daveheavyindustries.com/2011/02/10/xbox-live-port-forwards-for-cisco-800/feed/ 0 Cisco 877 TPG Config http://www.daveheavyindustries.com/2011/02/07/cisco-877-tpg-config/ http://www.daveheavyindustries.com/2011/02/07/cisco-877-tpg-config/#comments Mon, 07 Feb 2011 06:51:40 +0000 admin http://wp.daveheavyindustries.com/?p=91 Well, TPG uses PPPoE rather than PPPoA like most ISP, and there were a few issues with the MSS before my TPG was working correctly. Now it runs like a dream, no complaints at all.

I'll post the relevant sections below

config working on IOS 12.4(24)T3

replace [username] with your TPG username and [password] with your TPG password.

hostname router
ip dhcp pool general
network 10.10.10.0 255.255.255.0
dns-server 10.10.10.1
default-router 10.10.10.1
domain-name router.local
!
ip dns server
ip domain name router.local
ip name-server 203.12.160.35
ip name-server 203.12.160.36
ip name-server 203.12.160.37
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip mroute-cache
no atm ilmi-keepalive
!
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
pvc 8/35
pppoe-client dial-pool-number 1
!
!
interface FastEthernet0
switchport access vlan 1
!
interface FastEthernet1
switchport access vlan 1
!
interface FastEthernet2
switchport access vlan 1
!
interface FastEthernet3
switchport access vlan 1
!
interface Vlan1
description --- INSIDE INTERFACE ---
ip address 10.10.10.1 255.255.255.0
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1452
!
interface Dialer1
description --- OUTSIDE INTERFACE ---
ip address negotiated
ip mtu 1492
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication pap callin
ppp pap sent-username [USERNAME]@tpg.com.au password 0 [PASSWORD]
!
ip access-list extended nat
permit ip 10.10.10.0 0.0.0.255 any
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
no ip http secure-server
ip dns server
ip nat inside source list nat interface Dialer1 overload

[facebook_ilike]

Thanks Narkotix for correcting a mistake with the dns server config.

]]> http://www.daveheavyindustries.com/2011/02/07/cisco-877-tpg-config/feed/ 9