3Sep/110
iinet cisco 877 config
This is the config I'm recommending for people running cisco 877's on iinet. feel free to post back with any amendments.
config working on IOS 12.4(24)T3
replace [username] with your iinet username and [password] with your iinet password.
hostname router ip dhcp pool general network 10.10.10.0 255.255.255.0 dns-server 10.10.10.1 default-router 10.10.10.1 domain-name router.local ! ip dns server ip domain name router.local ip name-server 203.0.178.191 interface ATM0 no ip address no ip redirects no ip unreachables no ip proxy-arp no ip mroute-cache no atm ilmi-keepalive ! interface ATM0.1 point-to-point description $ES_WAN$$FW_OUTSIDE$ pvc 8/35 encapsulation aal5mux ppp dialer dialer pool-member 1 ! ! interface FastEthernet0 switchport access vlan 1 ! interface FastEthernet1 switchport access vlan 1 ! interface FastEthernet2 switchport access vlan 1 ! interface FastEthernet3 switchport access vlan 1 ! interface Vlan1 description --- INSIDE INTERFACE --- ip address 10.10.10.1 255.255.255.0 ip nat inside ip virtual-reassembly ip tcp adjust-mss 1412 ! interface Dialer1 description --- OUTSIDE INTERFACE --- ip address negotiated ip mtu 1452 ip nat outside ip virtual-reassembly encapsulation ppp dialer pool 1 dialer-group 1 no cdp enable ppp authentication chap pap callin ppp chap hostname [USERNAME]@iinet.net.au ppp chap password password 0 [PASSWORD] ppp pap sent-username [USERNAME]@iinet.net.au password [PASSWORD] ! ip access-list extended nat permit ip 10.10.10.0 0.0.0.255 any ip route 0.0.0.0 0.0.0.0 Dialer1 no ip http server no ip http secure-server ip dns server ip nat inside source list nat interface Dialer1 overload [facebook_ilike]
Leave a comment