Dave Heavy Industries Dave Heavy Industries – blog


iinet cisco 877 config

This is the config I'm recommending for people running cisco 877's on iinet. feel free to post back with any amendments.
config working on IOS 12.4(24)T3

replace [username] with your iinet username and [password] with your iinet password.

hostname router
ip dhcp pool general
domain-name router.local
ip dns server
ip domain name router.local
ip name-server
interface ATM0
no ip address
no ip redirects
no ip unreachables
no ip proxy-arp
no ip mroute-cache
no atm ilmi-keepalive
interface ATM0.1 point-to-point
description $ES_WAN$$FW_OUTSIDE$
pvc 8/35
encapsulation aal5mux ppp dialer
dialer pool-member 1
interface FastEthernet0
switchport access vlan 1
interface FastEthernet1
switchport access vlan 1
interface FastEthernet2
switchport access vlan 1
interface FastEthernet3
switchport access vlan 1
interface Vlan1
description --- INSIDE INTERFACE ---
ip address
ip nat inside
ip virtual-reassembly
ip tcp adjust-mss 1412
interface Dialer1
description --- OUTSIDE INTERFACE ---
ip address negotiated
ip mtu 1452
ip nat outside
ip virtual-reassembly
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp authentication chap pap callin
ppp chap hostname [USERNAME]@iinet.net.au
ppp chap password password 0 [PASSWORD]
ppp pap sent-username [USERNAME]@iinet.net.au  password [PASSWORD]
ip access-list extended nat
permit ip any
ip route Dialer1
no ip http server
no ip http secure-server
ip dns server
ip nat inside source list nat interface Dialer1 overload

Tagged as: , , , , , Leave a comment
Comments (0) Trackbacks (0)

No comments yet.

Leave a comment

No trackbacks yet.